The Cheapest Gunsmithing Tool

Tools on average are the most expensive part of any trade.  Here is a little tip on a useful and inexpensive tool most shooters can use and afford.  They have many uses at the work bench and at the range.  They are cheap enough that you can afford as many as you have use for, and you won't even think twice about the cost.

Use them for scope adjusting tools, spacers to protect the action or barrel from clamps and retaining screws in jigs/fixtures, or there best use...  On bolt action rifles where the striker must be retained to the rear for disassembly of the bolt.  These little babies are perfect. 

(Tongue firmly implanted in cheek) I have seen guys use washers purchased at the local hardware store to do the same work.  But, they cost 3 to 5 times more and do the same work.  Save big $ with this little tip.